FAQ

How strong are the dome frames?

Our units are made with galvanized steel with a wall thickens of 1.5mm standard. Double PVC coated polyester mesh is used to make the covers for all of our dome tents. The thickness ranges from 19 oz/sq. yd. (650 g/sq. m.) to 28 oz/sq. yd. (950 g/sq. m.) and higher thickness is available for special requests. This coated polyester material is heavy and, consequently, a strong material with greater abrasion resistance.  

How much does it cost to ship my dome?

We will ship our domes anywhere worldwide and provide free shipping.

How long will it take to receive my order?

Due to congestion at ports and post-COVID-19 transportation imbalances, please allow 4-10 weeks for your order to be delivered. Delivery to New England states (Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, and Vermont) may be longer (up to 14 additional days) due to the geographical location and logistics.

Will your company build my dome?

We offer step by step instructions to put together all of our domes which are very easy to follow and with the help of a few friends the dome will take shape in a matter of hours. However, if required we do offer on site support with associated travel costs and day rates which you can enquire about upon placing your order.

Do I require mechanical support to build my dome?

All of our domes 8M (26’) and below are easily assembled requiring basic tools, a couple ladders and some helpful friends. Any larger domes may require you to seek additional support for construction.

Does you sell replacement covers?

All individual pieces of the domes can be purchased separately including the covers. Please contact for any questions regarding additional hardware or covers.

What is the best way to construct my dome?

We recommend starting dome construction from the bottom and working your way to the top ring by ring as per the directions. You want to keep most of your connections hand tight allowing the dome to remain moveable as you build your way up. Once you reach the top you can begin to tighten the connections all the way down. As you make a connection we recommend highlighting the installed tubing on the instruction diagram so you prevent any confusion on which connection to make next.

How is a connection made?

Each piece of tubing is measured, constructed, and stamped with a number as well as a hole in each end for a specific location on the dome. Each connection will have a washer placed on each side with a bolt running through which is secured by a nut screwed on the opposite end.

Can you run power and utilities to the domes?

Yes, normally customers run utilities up through the floor of the dome or through any walls they have constructed within the dome.

What is included with the dome? Is there flooring?

The basic dome is comprised of the steel structure, PVC water tight cover and framed doorway which you can add a pre hung door from us or mount your own door. We do not include flooring or a support kit with the dome but we do have plans and vast experience to share depending on your vison.

How is the dome heated?

You can add a stove jack or fireplace which can be mounted to the dome frame to direct flue gasses safely outside of the dome. We recommend pellet stoves for their longer burn times but all heat mediums will work including wood stove, electric, radiant and on.

Does you offer A/C

We do not offer A/C units however we do offer and highly recommend the solar powered fans to promote air flow through the dome which will assist in preventing stagnant air and mildew. If you plan to add A/C we recommend mini split units which have been widely used and proven efficient for our domes.

What is the interior of the dome comprised of?

The dome is exactly that, a dome. The inside of the dome is open to whatever vision you decide to create.

How is the dome secured to the ground?

With every dome there are “feet” included for the bottom “nodes” or connections. These feet have pre drilled holes to attach to whatever base you choose.

What if I want a refund on my order?

All products are checked for quality prior to shipping. Should any mechanical components be faulty we will replace the goods. Since all domes and dome components are made to order we don’t exchange or return if it is simply a change of mind, unmet expectations, production delays, customs delays, shipping delays

Once payment is made the order is final, please make sure to do all research before confirming any orders. For this reason all sales are final on payment. Please understand there may be delays in the ordering manufacturing process as these units are not mass produced and each item is carefully and thoughtfully constructed. Due to this you may experience longer than expected production times.